Home > News > Industry News

The Following Points Should Be Paid Attention To In The Operation And Production Of Plastic Granulator Machine

2023-11-24

The production operation of the plastic granulator needs to pay attention to the following points. The correct operation of the plastic granulator can be used to prolong the service life of the equipment. However, the use of the plastic granulator does not receive enough attention in our daily life, and it will also To cause unnecessary problems, the following points need to be kept in mind.




1. Pay attention to fire safety. Fire extinguishers must be placed around the plastic granulator during the production process.


2. Do not use low-quality recycled materials with metal impurities or sediment (it is best to add a feeding iron remover to remove iron in the plastic during the feeding process), and no metal objects that may fall into the material should be placed near the feeding port , to prevent falling into the hopper from aggravating the wear of the screw and barrel or causing jamming and damage.


3. In the event of failure or abnormal situation, it must be reported to the relevant personnel, and professional maintenance personnel will handle it. If any abnormal phenomenon affecting safety is found, immediately press the emergency stop switch to cut off the power supply.


4. When operating plastic machinery, it is necessary to strictly follow the requirements of the operating procedures, and no illegal operations are allowed at non-operating stations. To ensure the reliability of the safety device, the safety protection measures of the machine shall not be destroyed in pursuit of efficiency.


5. The gearbox of the plastic granulator should pay attention to the lubricating oil that meets the requirements and replace it regularly.


6. Operated by operators who have been trained and are familiar with the performance of plastic mechanical structures and operating procedures.


7. During the production and operation of the plastic granulator, if the plastic temperature does not reach the set temperature, and the holding time is not enough, the screw is not allowed to start and run.


8.Proficiency in mastering the above seven precautions can greatly reduce mechanical failure and mechanical damage caused by incorrect operation, and greatly prolong the service life, stability and safety of the machine.


Our company specializes in the production of various plastic recycling equipment. If necessary, you can consult relevant content at any time and look forward to our cooperation.

Previous:No News
Next:No News

Leave Your Message

  • Click Refresh verification code